Functions 3. Installation
100 RC700 Series Rev.3
3.3 Power Supply
3.3.1 Specifications
Ensure that the available power meets following specifications.
Voltage 200 to 240 VAC
(Input voltage should be with in ±10 % of the rated
voltage.)
Phase Single phase
Frequency 50/60 Hz
Momentary Power
Interrupt
10 ms or less
Rated Capacity Maximum: 2.5 kVA
Actual power consumption depends on the model, motion,
and load of the Manipulator.
For approximate power consumption of each model, refer
to the following values.
RC700 / RC700-A
RC700DU / RC700DU-A
Refer to the Manipulator manual for rated capacity of the
Manipulator motor.
To Next Page
Loading...
