Epson RC700 Series - Page 123

Functions 3. Installation
RC700 Series Rev.3 105
(5)
PC for development
Connect the PC for development.
For details, refer to the 7. Development PC Connection USB Port.
(6)
USB memory
Connect the USB memory.
For details, refer to the 8. Memory Port.
(7)
LAN (EtherNet Communication)
Connect the EtherNet cable.
For details, refer to the 9. LAN (Ethernet Communication) Port.
(8)
I/O connector
This connector is used for input/output devices of the user.
When there are input/output devices, use this connector.
There are I/O cable (option) and terminal block (option) for the I/O connector.
For details, refer to the 13. I/O Connector.
(9)
TP cable
Connect the option Teach Pendant.
For details, refer to the 10.TP Port.
(10)
Standard RS-232C port
This port is used for the RS-232C communication with external devices.
For details, refer to 12. Standard RS-232C Port.
(11)
R-I/O Connector
This connector is used for connecting with input signals necessary for real time I/O
function.
For details, refer to the 15. R-I/O Connector.
(12)
Fieldbus I/O
If necessary, take EMC countermeasures for the Fieldbus I/O cable.
For details, refer to 3.5 Noise Countermeasures.