132 Appendix
TM-L90 Peeler Model
39* models Other than 39* models
Print method Thermal line, 8 dots/mm x 8 dots/mm (203 dpi x 203 dpi)
Print width 80 mm (factory setting) or 38 to 70 mm can be set using a roll paper spacer
Manual cutter
specification
With continuous issuing, it is possible to cut the paper by hand
Possible thickness to be
cut with the manual cutter
100 m or less
Character sets 95 alphanumeric,
18 international character sets,
Extended graphics 128 x 47 pages
(including user-defined page)
95 alphanumeric,
14 international character sets,
Extended graphics 128 x 11 pages
(including user-defined page)
Interface (compatible) RS-232C, Parallel, USB, Ethernet (10Base-
T/100Base-TX), Wireless LAN(IEEE802.11a/
b/g/n)
RS-232C, Parallel
Dealer option:
USB, Ethernet (10Base-T), Wireless LAN
(IEEE802.11b)
Buffer Receive buffer: 4 KB / 45 bytes
User-defined buffer
Downloaded bit image: Approximately 12 KB (common for all models)
User-defined characters: Approximately 11 KB (for ANK/Multilingual model)
Approximately 15 KB (for Japanese model)
Download graphics memory: 208 KB --
Macro buffer: 2 KB
Non-volatile graphics data buffer: 384 KB maximum
User NV memory: 192 KB maximum
Note:
The combination of NV graphics data buffer and user NV memory is determined
by the memory switch.
Page mode area: 103 KB
D.K.D. function 2 drives
Power Supply Power supplied by AC adapter PS-180 (option)
Operating Voltage DC 24 V ± 7%
Current consumption Average: Approximately 1.8 A
(Character font A, -N, 36-character
rolling pattern, fullcolumn printing)
Average: Approximately 1.7 A
(Character font A, -N, 36-character
rolling pattern, fullcolumn printing)
Peak: Approximately 7.7 A
Standby: Approximately 0.1 A
Temperature Operating: 5 to 45 °C {41 to 113 °F}
Storage: –10 to 50 °C {14 to 122 °F}
Humidity 10 to 90%
Weight (mass) Approximately 1.9 kg {4.19 lb}
To Next Page
Loading...
