Epson TM L90 Technical Reference Guide

20 Product Overview
1.2.6 Power Switch Cover
To prevent unintentional contact or improper changes and to improve the appearance, use a
power switch cover. When using the power switch cover, to turn on or off the TM printer, press
the power switch through the hole in the power switch cover. Attach the cover as shown in the
illustrations below.
WARNING:
If an accident occurs with the power switch cover attached, unplug the power cord
immediately. Continued use may cause fire or shock.
CAUTION:
Do not remove the power switch soft cover. (only for TM-L90 4** models and TM-L90
Peeler 39* models)
2
3
1
2
1
TM-L90 4** models, TM-L90 Peeler 39* models
TM-L90 other than 4** models, TM-L90 Peeler other than 39* models

Epson TM L90 Specifications

General

Maximum resolution	203 x 203 DPI
Maximum roll diameter	90 mm
Supported paper width	37.5, 79 mm
RS-232 ports	1
Standard interfaces	RS-232
Connectivity technology	Wired
Country of origin	China
Dimensions (WxDxH)	140 x 203 x 148 mm
Flash memory	0.384 MB
Operating temperature (T-T)	5 - 45 °C
Pallet width	800 mm
Pallet height	2600 mm
Pallet length	1200 mm
Pallet width (UK)	1000 mm
Quantity per pallet	112 pc(s)
Quantity per pallet (UK)	168 pc(s)
Quantity per pallet layer	16 pc(s)
Quantity per pallet layer (UK)	24 pc(s)
Package depth	257 mm
Package width	193 mm
Package height	241 mm
Package weight	2560 g
Quantity per pack	1 pc(s)