Epson TM L90 - Character Specifications

Appendix 137
TM-L90/TM-L90 Peeler Model Technical Reference Guide
Character Specifications
The actual print character is smaller than the size shown in the table above, because the above size includes
spaces in the font.
Characters can be scaled up to 64 times as large as the standard size.
Character size not including the horizontal spacing in the standard scale is as follows:
Font A (12 ✕ 24): 1.25 (W) ✕ 3.0 (H) mm
Font B (9 ✕17): 0.88 (W) ✕ 2.13 (H) mm
Character Specifications
Item
Specifications
TM-L90 4** models, TM-L90 Peeler
39* models
TM-L90 other than 4** models, TM-
L90 Peeler other than 39* models
Character type Alphanumeric 95 characters
International 18 sets 14 sets
Extended graphics 128 characters ✕ 47 pages
(including user-defined page)
128 characters ✕ 11 pages
(including user-defined page)
JIS (JISX0208-1990) 6879 characters
Special font 845 characters
JIS code Shift JIS code
2D-21 to 2D-7E 87-40 to 87-9D
79-21 to 7C-7E ED-40 to EE-FC
FA-40 to FC-4E
Character configuration See "Character Configurations and Dimensions" table. (Default is Font
A.)
Character dimensions See "Character Configurations and Dimensions" table. (Spaces
between characters not included.)
Character Configurations and Dimensions
Standard Double-height Double-width
Double-width /
Double-height
W
✕ H (mm) W ✕ H (mm) W ✕ H (mm) W ✕ H (mm)
Font A 12
✕ 24 1.50 ✕ 3.0 1.50 ✕ 6.0 3.0 ✕ 3.0 3.0 ✕ 6.0
Font B 9
✕ 17 1.13 ✕ 2.13 1.13 ✕ 4.25 2.25 ✕ 2.13 2.25 ✕ 4.25
Kanji 24
✕ 24 3.0 ✕ 3.0 3.0 ✕ 6.0 6.0 ✕ 3.0 6.0 ✕ 6.0
Kanji 20
✕ 24 2.5 ✕ 3.0 2.5 ✕ 6.0 5.0 ✕ 3.0 5.0 ✕ 6.0
Kanji 16
✕ 16 2.0 ✕ 2.0 2.0 ✕ 4.0 4.0 ✕ 2.0 4.0 ✕ 4.0