Epson TM L90 Technical Reference Guide

16 Product Overview
1.2.2 Part Names (TM-L90 Peeler Model)
Part Names of TM-L90 Peeler Model
* Refer to page 44 for the DIP switch positions. (available only for TM-L90 Peeler other than 39* models)
Cutter cover
Control panel
Roll paper cover
Power switch
Peeler cover
FEED Button
Wiring knockout
Manual cutter
Peeler open lever
Cover open lever
Label peeling
sensor
Rocker switch (with
a power switch soft
cover)
or
Non-locking
push button
Power switch

Epson TM L90 Specifications

General

Maximum resolution	203 x 203 DPI
Maximum roll diameter	90 mm
Supported paper width	37.5, 79 mm
RS-232 ports	1
Standard interfaces	RS-232
Connectivity technology	Wired
Country of origin	China
Dimensions (WxDxH)	140 x 203 x 148 mm
Flash memory	0.384 MB
Operating temperature (T-T)	5 - 45 °C
Pallet width	800 mm
Pallet height	2600 mm
Pallet length	1200 mm
Pallet width (UK)	1000 mm
Quantity per pallet	112 pc(s)
Quantity per pallet (UK)	168 pc(s)
Quantity per pallet layer	16 pc(s)
Quantity per pallet layer (UK)	24 pc(s)
Package depth	257 mm
Package width	193 mm
Package height	241 mm
Package weight	2560 g
Quantity per pack	1 pc(s)