EasyManuals Logo

Epson TM L90 Technical Reference Guide

Epson TM L90
212 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #133 background imageLoading...
Page #133 background image
Appendix 133
TM-L90/TM-L90 Peeler Model Technical Reference Guide
Print Specifications
Note:
The print speed listed above is the value when the printer prints with the default print density level at 24
V and 25
C. The print speed may be changed automatically with the condition of the supply voltage or the
head temperature.
Printing speed may be slower depending on the data transmission speed and the combination of control
commands.
Item Specifications
Printing method Thermal line printing
Dot density 0.125 mm/dot x 0.125 mm/dot (203 dpi x 203 dpi)
(dpi: dots per 25.4 mm {1"})
Printing direction Unidirectional with friction feed
Paper width 80mm (79.5±0.5mm) (default setting)
It is possible to set optional positions in the range of 38 to 70 mm {1.50
to 2.76"}. The range of 71 to 79 mm {2.80 to 3.11"} cannot be set.
Maximum printable area 72 mm {2.83"}, 576 dot positions
(when the paper width is 80 mm)
Characters per line Font Characters per line
(with 80 mm paper
width)
Font A 12
24 48
Font B 9
17 64
Kanji 24
24 24
Kanji 20
24 28
Kanji 16
16 36
(Default setting is font A.)
Print Speed <Normal printing> (default setting)
120 mm/s {4.72"} maximum
<High speed printing> (selected with the memory switch)
150 mm/s {5.91"} maximum
(The high speed printing can be selected when the specified paper
is used.)
<Ladder barcode, two-dimensional code printing>
90 mm/s {2.76"} maximum
<Multi-tone graphics printing*> (only supported with APD)
120 mm/s {3.54"} maximum (*: available only for 4** models)
Carriage return width 3.75 mm {0.15"}
Programmable by control command.

Table of Contents

Other manuals for Epson TM L90

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson TM L90 and is the answer not in the manual?

Epson TM L90 Specifications

General IconGeneral
Maximum resolution203 x 203 DPI
Maximum roll diameter90 mm
Supported paper width37.5, 79 mm
RS-232 ports1
Standard interfacesRS-232
Connectivity technologyWired
Country of originChina
Dimensions (WxDxH)140 x 203 x 148 mm
Flash memory0.384 MB
Operating temperature (T-T)5 - 45 °C
Pallet width800 mm
Pallet height2600 mm
Pallet length1200 mm
Pallet width (UK)1000 mm
Quantity per pallet112 pc(s)
Quantity per pallet (UK)168 pc(s)
Quantity per pallet layer16 pc(s)
Quantity per pallet layer (UK)24 pc(s)
Package depth257 mm
Package width193 mm
Package height241 mm
Package weight2560 g
Quantity per pack1 pc(s)

Related product manuals