90 Application Development Information
❏ Utilities packed with various drivers
• SetUpPOS Utility
Equipment and connection ports can be selected, and various settings can be made.
(Paper size, print waiting time setting, etc.)
• TM Flash logo utility
A bitmap file can be registered to the printer or customer display, for example.
• USB device driver
Driver necessary to connect the USB interface printer.
• Sample programs
Sample programs in VB, VC++ can be installed.
5.1.2.3 EPSON OPOS ADK Support Environment
Supported interfaces
• Serial, Parallel, USB, Ethernet, Wireless LAN
Supported OSs (with confirmation of system operation)
For details on the supported operating systems, see the release note of the driver for the latest
information.
Supported development languages
For details on the supported development languages, see the release note of the driver for the
latest information.
5.1.2.4 Driver Information and Download Destination
See "Introduction of Control Methods" on page 85.
5.1.3 ESC/POS Commands
Printing/control via ESC/POS commands is a method proposed by Epson to directly control the
TM printer using ESC/POS commands. The printer can be controlled directly by sending ESC/
POS commands from an application to the printer. For detailed information on the ESC/POS
commands, see the ESC/POS Command Reference. For details on how to obtain this manual,
see "Introduction of Control Methods" on page 85.
Note:
The printer of Ethernet specifications requires the IP setup utility separately. For details on how to obtain
the utility, see "Various Utilities" on page 91.
To Next Page
Loading...
