54 Setup
Serial communication conditions
Note:
For models other than 4** models, these settings are valid only when the DIP switch 1-2 is Off.
USB communication conditions (only for 39* models)
This setting is valid for the built-in USB.
Item
Option
(underlined: initial setting)
Msw Setting
utility
Msw Setting
Mode
Baud rate 2400, 4800, 9600, 19200
, 38400, 57600,
115200 bps
✓✓
Parity None
, Odd, Even ✓✓
Flow control DTR/DSR
, XON/XOFF ✓✓
Data length 7-bits, 8-bit
s ✓✓
Item
Option
(underlined: initial setting)
Msw Setting
utility
Msw Setting
Mode
Class Vendor-defined class
, Printer class ✓✓
To Next Page
Loading...
