Epson WF-7210 series - Page 21

Checking the Settings for the IP Address
Check the settings for the IP address.
1. Select Settings on the home screen on the printer's control panel.
Note:
If the screen is turned o, press any button on the control panel.
2. Select Network Status.
3. Select Wi re d L A N/ Wi - Fi S t a t u s.
4. Conrm each setting by pressing the d button.
5. When you have nished conrming, press the
button several times to return to the home screen.
Connecting to Ethernet
Connect the printer to the network by using the Ethernet cable, and check the connection.
1. Connect the printer and hub (L2 switch) by Ethernet cable.
2.
Select Settings on the home screen on the printer's control panel.
Note:
If the screen is turned o, press any button on the control panel.
Administrator's Guide
Connection
21