125
Selecting Finishing Options - Windows
You can select a variety of finishing options for your document or photo on the Finishing tab.
1. To store print jobs in the product's memory, select one of the Job Type options:
• Select Normal Print to print jobs without storing them.
• When printing multiple copies, select Verify Job to print one copy to verify content and settings.
You can then continue printing from the product control panel.
• Select Re-Print Job to store a print job in the product's memory. You can then print from the
product control panel.
2. Select the Paper Source and Output Tray options you want to use.
3. Select one of the following Sort options:
• Select Rotate Sort to stack printouts alternately in landscape and portrait orientations. The Paper
Source and Output Tray setting must be set to Auto Select.
• Select Shift Sort to offset each set of copies. The Output Tray setting must be set to Finisher
Tray.
Note: This option is available only when the optional finisher unit is installed.
To Next Page
Loading...
Need help?
General
