EasyManua.ls Logo

Epson WF-C20590

Epson WF-C20590
403 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
228
You see this screen:
5. Select Fax Setting Wizard.
6. Make sure a phone line is connected and select Proceed.
7. Use the displayed keypad to enter the sender name for your fax source, such as your name or a
business name. You can enter up to 40 characters. Select OK.
8. Use the displayed keypad to enter your fax number, up to 20 characters and select OK.
Note: The name and phone number you enter appears in the fax header on the faxes you send.
9. On the Distinctive Ring Setting screen, do one of the following:
If you have subscribed to a distinctive ring service from your telephone company, select Proceed.
Select the ring pattern to use for incoming faxes or select On. Go to step 12.
If you do not have a distinctive ring service, select Skip and go to the next step.
Note: Distinctive ring services allows you to have several phone numbers on one phone line. Each
number is assigned a different ring pattern. You can use one number for voice calls and another for

Table of Contents

Other manuals for Epson WF-C20590

Related product manuals