252
You see a screen like this:
6. Select the number you want to use for the group you are adding.
7. Select the Group Name field. Use the displayed keyboard to enter the group name (up to 30
characters) and select OK.
8. Select the Index Word field. Use the displayed keyboard to enter a word to use when searching for
a group (up to 30 characters) and select OK. (This field is optional.)
9. Select Contact(s) Added to the Group.
You see your contacts list.
10. Select the number next to each contact you want to include in your group.
A check mark appears next to each selected contact.
11. Select Close to return to the previous screen.
12. Select OK.
Parent topic: Setting Up Contacts Using the Product Control Panel
To Next Page
Loading...
