263
Setting Options Description
Sharpness Varying levels
available
Adjusts the sharpness level of outgoing faxes
ADF 2-Sided Off Select On to enable 2-sided faxing from the ADF. The
Direct Send setting and color faxing are disabled
when you turn on this setting.
On
ADF Continuous Scan Off Select On to have the product to ask if you want to
scan another page after a document in the ADF has
finished scanning
On
Direct Send Off Select On to send black-and-white faxes to a single
recipient as soon as the connection is made, without
saving the scanned image to memory. You cannot
use this setting when sending a color fax or sending a
fax to multiple recipients.
On
Priority Send Off Select On to send the current fax before other faxes
waiting to be sent
On
Send Fax Later Off Select On to send the current fax at a selected time
On
Add Sender Information Off Includes a header, your phone number, or a
destination list in the selected location on your
outgoing faxes
Outside of Image
Inside of Image
Notify Send Result Off Sends a notification to the selected email address
when an outgoing fax is sent
On
Transmission Report Print on Error Selects when or if to print transmission reports
Print
Do Not Print
Backup Off Saves a copy of the scanned fax to the selected email
address or network folder/FTP location
On
Parent topic: Sending Faxes from the Product Control Panel
To Next Page
Loading...
Need help?
General
