304
2. Push in the ink cartridge that you want to remove until it pops out, then slowly pull it all the way out.
Note: Dispose of used cartridges carefully. Do not take the used cartridge apart or try to refill it.
3. Gently shake the new ink cartridge horizontally back and forth about 15 times, then remove it from its
package.
Caution: Do not remove any labels or seals, or ink will leak. Do not touch the green chip or the ink
supply port on the cartridge. Install the new cartridge immediately after removing the old one; if you
do not, the print head may dry out and be unable to print.
Warning: If ink gets on your skin, wash it thoroughly with soap and water. If ink gets into your eyes,
flush them immediately with water. If ink gets into your mouth, spit it out and see a doctor right away.
Keep ink cartridges out of the reach of children.
4. Insert the new cartridge and push it all the way in until it clicks into place.
5. Close the ink cartridge cover.
The product starts charging the ink. This may take a few minutes. When the home screen appears,
ink replacement is complete.
Note: Do not turn off the product while charging or you will waste ink.
Caution: If you remove an ink cartridge for later use, protect the ink supply area from dirt and dust and
store it in the same environment as the printer. The valve in the ink supply port is designed to contain
To Next Page
Loading...
Need help?
General
