Epson WF-C20590 User Manual

313
8. Check the printed pattern to see if there are gaps in the lines.
Print head is clean
Print head needs cleaning
9. Do one of the following:
• If there are no gaps, select OK.
• If there are gaps or the pattern is faint, select NG and continue.
10. Follow the instructions on the screen to clean the print head, check the nozzles, and repeat the
process as necessary.
Caution: Never turn off the product or open the front cover during a cleaning cycle or you may not
be able to print.
If you don’t see any improvement after cleaning the print head up to 4 times, wait at least 6 hours without
printing. Then try cleaning the print head again. If quality still does not improve, one of the ink cartridges
may be old or damaged and needs to be replaced.
Parent topic: Print Head Maintenance
Related tasks
Cleaning the Print Head Using the Product Control Panel

Epson WF-C20590 Specifications

General

Connectivity	USB, Ethernet, Wi-Fi, Wi-Fi Direct
ADF Capacity	150 sheets
Monthly Duty Cycle	Up to 400, 000 pages
Category	All in One Printer
Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Print Technology	PrecisionCore
Print Speed	Up to 100 ppm (black/color)
Print Resolution	600 x 2400 dpi
Scanner Type	Color flatbed/ADF
Scan Resolution	600 dpi
Ink Cartridges	Black, Cyan, Magenta, Yellow
Display	9-inch touchscreen