AT Commands Modem Terminated 185
+FPTS FPTS Indication Transmit
+FPTS FPTS Indication Receive
+FDTC FDTC Indication
120-255 Reserved codes
Description: Reports a <ppr> number representing the copy quality and related post-page message
responses received from the remote TAE. The response is generated in execution of an
AT+FET command.
Unsolicited result code:+FPTS: <ppr>
Parameter:
<ppr>: See AT+FPTS.
Description: Receive page transfer status.
Unsolicited result code:+FPTS: <ppr>,<lc>[,<blc>,<cblc>][,<lbc>]
Parameters:
<ppr>:
<ppr> Description
0 Partial page errors
1 Page good
2 Page bad; retrain requested
3 Page good; retrain requested
4 Page bad; interrupt requested
5 Page good; interrupt requested
6 Partial page reception failed after 4 retries (ECM only)
7 Acknowledge a CTC message (ECM)
<lc>: Line count.
<blc>: Bad line count.
<cblc>: Consecutive bad line count, see AT+FBADLIN.
<lbc> Lost byte count, due to TAE overflow.
Description: Reports the negotiated parameters. This message may be generated in execution of
AT+FDT or AT+FDR, before the CONNECT result code, if new DCS frames are
generated or received.
Unsolicited result code:+FDTC: <vr>,<br>,<wd>,<ln>,<df>,<ec>,<bf>,<st>
Parameters: See AT+FDCC.
To Next Page
Loading...
