EtherWAN EW50 - Page 169

EW50 Industrial LTE Cellular Gateway
169
IKE Proposal Definition Window
Item
Value setting
Description
IKE Proposal
Definition
Required setting
Specify the Phase 1 Encryption method. It can be DES / 3DES / AES-auto / AES-
128 / AES-192 / AES-256.
Specify the Authentication method. It can be None / MD5 / SHA1 / SHA2-256.
Specify the DH Group. It can be None / Group1 / Group2 / Group5 / Group14 /
Group15 / Group16 / Group17 / Group18.
Check the Enable box to enable this setting.
IPSec Phase Window
Item
Value setting
Description
Phase2 Key Life
Time
1. Required setting
2. 28800s is default
3. Max. 86400s
Specify the Phase2 Key Life Time in seconds.
Value Range: 30 ~ 86400.
IPSec Proposal Definition Window
Item
Value setting
Description
IPSec Proposal
Definition
Required setting
Specify the Encryption method. It can be None / DES / 3DES / AES-auto / AES-
128 / AES-192 / AES-256.
Note: None is available only when Encapsulation Protocol is set as AH; it is not
available for ESP Encapsulation.
Specify the Authentication method. It can be None / MD5 / SHA1 / SHA2-256.
Note: None and SHA2-256 are available only when Encapsulation Protocol is set
as ESP; they are not available for AH Encapsulation.
Specify the PFS Group. It can be None / Group1 / Group2 / Group5 / Group14 /
Group15 / Group16 / Group17 / Group18. Click Enable to enable this setting.