EasyManua.ls Logo

EtherWAN EW50 - Page 171

Default Icon
320 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EW50 Industrial LTE Cellular Gateway
171
Remote Netmask
Required setting
Specify the Remote Subnet Mask.
Remote Gateway
1. Required setting
2. IPv4 address or
FQDN format
Specify the Remote Gateway. The Remote Gateway
Under the Manually Key Management authentication configuration, only one subnet is supported for both
Local and Remote IPSec peer.
Manual Proposal Window
Item
Value setting
Description
Outbound SPI
Hexadecimal format
Specify the Outbound SPI for this IPsec tunnel.
Value Range: 0 ~ FFFF.
Inbound SPI
Hexadecimal format
Specify the Inbound SPI for this IPsec tunnel.
Value Range: 0 ~ FFFF.
Encryption
1. Required setting
2. Hexadecimal format
Specify the Encryption Method and Encryption key.
Available encryption methods are DES/3DES/AES-128/AES-192/AES-256.
The key length for DES is 16, 3DES is 48, AES-128 is 32, AES-192 is 48, and AES-
256 is 64.
Note: When AH option in Encapsulation is selected, encryption will not be
available.
Authentication
1. Required setting
2. Hexadecimal format
Specify the Authentication Method and Authentication key.
Available encryptions are None/MD5/SHA1/SHA2-256.
The key length for MD5 is 32, SHA1 is 40, and SHA2-256 is 64.
Note: When AH option in Encapsulation Protocol is selected, the None option in
Authentication will not be available.
Save
N/A
Click Save to save the settings
Undo
N/A
Click Undo to cancel the settings
Back
N/A
Click Back to return to the previous page.
Create/Edit Dynamic VPN Server List

Table of Contents