EW50 Industrial LTE Cellular Gateway
184
Specify the Static Key.
Note: Static Key will be available only when Static Key is chosen in Authorization
Mode.
By default Blowfish is
selected.
Specify the Encryption Cipher.
Select from Blowfish/AES-256/AES-192/AES-128/None.
By default SHA-1 is
selected.
Specify the Hash Algorithm.
Select from SHA-1/MD5/MD4/SHA2-256/SHA2-512/None/Disable.
By default Adaptive is
selected.
Specify the LZO Compression scheme.
Select from Adaptive/YES/NO/Default.
1. Optional setting.
2. The box is checked
by default.
Check the Enable box to activate the Persis Key function.
1. Optional setting.
2. Box is checked by
default.
Check the Enable box to activate the Persis Tun function.
Click the Edit button to specify the Advanced Configuration setting for the
OpenVPN server.
If the button is clicked, Advanced Configuration will be displayed below.
Check the Enable box to activate this OpenVPN tunnel.
Click Save to save the settings.
Click Undo to cancel the changes.
Click Back to return to last page.