EtherWAN EW50 User Manual

EW50 Industrial LTE Cellular Gateway
302
configuration page. (Basic Network > IPv6 > Configuration.)
LAN Interface Network Status
LAN Interface Network Status screen shows IPv4 and IPv6 information of LAN networks.
LAN Interface Network Status
Item
Value setting
Description
IPv4 Address
N/A
Displays the current IPv4 IP Address of the gateway
This is also the IP Address user use to access Router’s Web-based Utility.
IPv4 Subnet Mask
N/A
Displays the current mask of the subnet.
IPv6 Link-local
Address
N/A
Displays the current LAN IPv6 Link-Local address.
This is also the IPv6 IP Address user use to access Router’s Web-based Utility.
IPv6 Global Address
N/A
Displays the current IPv6 global IP address assigned by your ISP for your
Internet connection.
MAC Address
N/A
This area provides functional buttons.
Edit IPv4 Button when press, web-based utility will take you to the Ethernet
LAN configuration page. (Basic Network > LAN & VLAN > Ethernet LAN tab).
Edit IPv6 Button when press, web-based utility will take you to the IPv6
configuration page. (Basic Network > IPv6 > Configuration.)
Action
N/A
Displays the current IPv4 IP Address of the gateway
This is also the IP Address user use to access Router’s Web-based Utility.
3G/4G Modem Status
3G/4G Modem Status List screen shows status information for 3G/4G WAN network(s).
3G/4G Modem Status List
Item
Value setting
Description
Physical
Interface
N/A
Displays the type of WAN physical interface.
Note: Some device models may support two 3G/4G modules. Their physical interface

EtherWAN EW50 Specifications

General

Brand	EtherWAN
Model	EW50
Category	Gateway
Language	English