EVOCA La Radiosa - Cleaning the Residue Trays

05-2019 0073 00 11
CLEANING THE RESIDUE TRAYS
The residue trays can be easily removed to
make emptying and cleaning them easier.
The residue trays must be cleaned with the
machine switched on and the door closed.
liquiD rEsiDuEs
The liquid residue tray can be easily re-
moved, even if it is directly connected to a
mains drain.
Pull out the liquid residue tray to remove it.
If the liquid residue tray is not directly con-
nected to a drain in the mains, it will need to
be emptied on a regular basis.
Proceed to sanitise the tray.
soliD rEsiDuEs
moDEls witH a soliD rEsiDuE tray
The appliance control software noties
when the maximum number of dispenses
has been reached.
Coee-based selections are disabled.
To remove the solid residue tray:
1. Lift the dispensing nozzles using the
movement lever.
2. Remove the liquid residue tray.
3. Empty and wash the trays with a sanitis-
ing solution.
4. Reset the solid residue counters to zero
(solid residue tray empty function).
1
2
3
Fig. 7
1. Nozzle-moving lever
2. Solid residue tray
3. Liquid residue tray
moDEls witH a soliD rEsiDuE DiscHargE oN tHE
bENcH
Proceed as follows:
1. Lift the dispensing nozzles using the
movement lever.
2. Remove the liquid residue tray.
3. Remove the solid residue chute cover.
4. Empty and clean the solid residue tray.
5. Wash the solid residue chute to remove
any coffee residue.
6. Reinsert the residue chute and the liquid
residue tray.
1
2
3
Fig. 8
1. Nozzle-moving lever
2. Solid residue chute
3. Solid residue chute cover