26 05-2019 0073 00
bluEtootH iNstructioNs
Check that the Bluetooth function is active
on the appliance and the second device.
To enable communication between the
appliance and a Bluetooth device, the two
devices need to be paired (see the “net-
work” function).
-
access to the appliance when connect-
from the programming menus.
iNstructioNs for 3g coNNEctioN
To use the 3G connection, it is neces-
sary to have a SIM card (standard for-
Insert the SIM card into the appropriate
slot on the CPU card.
-Position the appliance where there is a
strong 3G network signal.
-Configure the 3G network-related settings
from the appliance’s menu.
NEtwork safEty iNDicatioNs
The appliance’s software has a (non-con-
gurable) rewall that blocks unwanted
access to the appliance when connected to
the network.
Always use the security (encryption) fea-
tures when connecting to the Wi-Fi, in order
to protect communications from those with
unauthorised access.
A network that uses a more recent encryp-
tion system is safer.
“Open” encryption does not guarantee any
type of protection.
-
tion.
When the appliance starts up for the rst
time, a guided sequence will be displayed
with some preliminary settings (language,
appliance name, etc.).
After the selections have been made, the
hydraulic circuit is lled up (installation).
When the appliance starts up, the mains
solenoid valve is opened automatically until
the hydraulic circuit is lled up.
the installation cycle, the appliance will
stop and wait for the water.
hydraulic circuit, then the hydraulic cir-
After the hydraulic circuit is lled, the appli-
ance rotates the brewing unit to correctly
position it; the display shows the following
in sequence:
-The software version of the appliance and
the software version of the touchscreen.
-The heating cycle status of the heating
units.
When the heating cycle has nished, the
beverages will be available.
To Next Page
