05-2019 0073 00 15
RINSING THE COMPONENTS
Start the rinse cycle (with hot water only)
of the various components (mixer, brewing
unit, etc.).
The rinse cycles do not replace the
need to regularly disassemble the com-
ponents for sanitisation.
Remove the cups from the dispensing area.
Scalding hazard! Do not put your
hands under the nozzles during the
wash cycles.
The selections will remain disabled for the
entire duration of the rinse cycle.
The automatic rinse cycles can be pro-
grammed; before programming the auto-
matic rinse cycles, a warning message will
be displayed on the touchscreen.
WASHING THE CAPPUCCINO
MAKER
For models with a cappuccino maker only.
The guided wash of the cappuccino maker
should be carried out each time that the ap-
pliance has nished being used for the day,
or more frequently, depending on how often
the appliance is used.
When the cappuccino maker needs to be
cleaned (with detergent), it signals when
the time limits and/or the set number of
selections have been reached.
wash cycle is performed.
products.
When using these products, strictly
follow the manufacturer's instructions
on storage, handling, dosing and use;
carefully read the safety instructions.
Do not use generic products as there is no
guarantee that they are hygienic, will not
alter the taste of the beverages, or will have
no negative eects on human health.
The appliance automatically prepares the
washing mixture with the indicated amount
of water.
It takes several minutes for the cappuccino
maker to be washed.
The detergent wash does not replace
-
er nozzle for regular sanitisation.
If for any reason the detergent cycle is
interrupted (e.g. manual interruption,
when the machine is restarted.
The appliance stores the date of the last
successful wash cycle.
To Next Page
