05-2019 0073 00 25
INSTALLING SIDE MODULES
The appliance can be tted with side mod-
ules (cooling module and cup warmers).
The cooling module and cup warmers are
available as optional extras.
Before installing the side panels, it is
necessary to unplug the appliance from
the power supply.
The side modules are supplied with instal-
lation and test instructions that must be
scrupulously followed.
The cooling module has been de-
signed to be positioned on the right
side of the appliance (as viewed from
Remove the milk hose and wash hose from
the holes on the side of the machine and
connect them to the ttings on the side of
the cooling module.
If you would prefer to place the cooling
module on the left side of the appliance
need to change the hose connection
inside the module and drill a hole in the
aesthetic left side of the appliance.
Please refer to the documentation sup-
plied with the cooling module.
CONNECTIVITY INDICATIONS
iNstructioNs for wi-fi coNNEctioN
-Position the appliance where there is a
strong Wi-Fi signal.
-Always enable security (encryption) fea-
tures to protect communications from
unauthorized access.
A network that uses a more recent encryp-
tion system is safer.
“Open” encryption does not guarantee any
type of protection.
-
-
of protection.
-Configure the Wi-Fi settings from the
appliance’s connectivity menu and set the
encryption used by the network to which
the appliance will be connected.
We recommend that you enable the “fire-
wall” function from the appliance’s network
settings.
-
-
the appliance will be connected.
The appliance does not support the
-
To Next Page
Loading...
