48 05-2019 0073 00
maiNtENaNcE
programmiNg
automatic wasHEs/riNsEs
The automatic wash and/or rinse cycle
programmes of the appliance or functional
units can be enabled/disabled.
Programme the type of wash and/or rinse
to be performed on the day and time that
has been set.
Automatic wash/rinse cycles can be added
and removed via .
water. Scalding hazard! Do not put your
hands in the dispensing area.
During the washes and rinses, a message
appears showing the progress of the oper-
ation.
wasH mEssagEs
Set the intervals (number of hours and/or
selections) for each type of wash/rinse.
When the set values have been reached,
the appliance will display a wash/rinse
message.
Each wash/rinse can be made compulsory:
the appliance or some functional units will
not work until a wash/rinse has been per-
formed.
NExt wasHEs
Displays when the next wash/rinse will be
required for each type of wash/rinse.
riNsEs DuriNg iNactivE pErioDs
This function can be used to programme
quick rinses on some of the functional
units, when they are not in use (Espresso
unit, Evomilk, etc.).
Set:
-How long after its last use to dispense the
rinsing water into the functional unit.
E.g. 12 minutes: a rinse cycle is performed
12 minutes after the functional unit was
last used.
-Set the amount of water and/or the rinse
duration in seconds.
Before the rinse cycle begins, a mes-
sage informing of the impending rinse
cycle is displayed.
During the washes and rinses, a mes-
sage appears showing the progress of
the operation.
gENEral sEttiNgs
taNk
The appliance can be supplied by mains
(OFF) or a tank (ON).
ENabliNg tHE DispENsiNg complEtE
sigNal
Enables/disables a beep when the appli-
ance has nished dispensing.
liquiD tray lEvEl sENsor
Enables/disables the “liquid residue tray
full” signalling sensor.
accEssiNg tHE mENus witH tHE Door
closED
Enables/disables access to the program-
ming menus when the door is closed.
To Next Page
