05-2019 0073 00 1
Introduction
The technical documentation forms an
integral part of the appliance and must
therefore accompany any movement or
transfer of ownership in order to allow
the various operators to further consult
the documentation.
Before installing and using the appliance,
the document contents need to be scrupu-
lously read and understood, as the manual
provides important information regarding
installation safety, provisions of use and
maintenance work.
Some illustrations in this manual may show
details that are dierent from those of the
appliance, but the essential information will
however remain unchanged.
The manual is divided into three chap-
ters.
Chapter 1 describes the loading and rou-
tine cleaning operations to be performed in
the areas of the appliance that can only be
accessed via a key-operated door, without
needing to use other tools.
Chapter 2 contains instructions regarding
correctly installing the appliance and the
information required to optimise the appli-
ance's performance.
Chapter 3 describes the maintenance work
that requires the use of tools to access po-
tentially dangerous areas.
The operations described in Chapters
2 and 3 must solely be carried out by
the appliance's operation, both from an
electrical safety and hygiene point of
view.
TRANSPORT AND STORAGE
traNsport
Special care must be taken when handling
the appliance in order to avoid causing
damage to the appliance and people.
When handling the appliance, there is a
Move the appliance using lifting equip-
ment that is suitable for the size and
-
ing equipment can use the equipment.
Avoid:
-Tipping over and/or tilting the appliance;
-Dragging or lifting the appliance with ropes
or similar;
-Lifting the appliance with lateral grips;
-Shaking or tossing the appliance and its
packaging.
storagE
The storage environment needs to be dry
and of a temperature between 0 and 40°C.
If the appliance freezes, it must be condi-
tioned in environments with temperatures
between 0 and 40°C.
Wait until the appliance's temperature
reaches the same temperature as its sur-
rounding environment before switching it
on.
If there is any moisture condensation, wait
for it to dry completely before switching the
appliance on.
To Next Page
