62 05-2019 0073 00
aDvaNcED variablE ENviroNmENtal fEa-
turEs
It allows the advanced features to be ena-
bled, in order to diagnose application and/
or operating system malfunctions.
Activating these functions will slow down
the appliance’s operation.
This menu is for the exclusive use of the
manufacturer.
tEcHNical spEcificatioNs
compoNENt
tEst
Allows the appliance’s main components to
be checked.
The components that can be checked are
displayed.
Choose the component to be checked.
brEwiNg uNit
Starts moving the brewing unit.
EsprEsso coNtaiNEr
A dose of coee beans is ground.
iNstaNt coNtaiNEr
The instant powder motor-doser is activat-
ed for a few seconds.
mixErs
The mixer is activated for a few seconds.
ligHtiNg
The appliance’s lighting is activated for a
few seconds.
solENoiD valvEs
The selected solenoid valve is activated for
a few seconds.
Evomilk
must be removed and the wash tray
must be inserted.
-The hoses are emptied and a check is car-
ried out to make sure that the conductivity
sensor indicates that the hoses are empty.
-Hot water is dispensed and the water tem-
perature is checked.
-The milk suction tube is rinsed.
-Cold water is dispensed from the nozzles
and the temperature and water passing
through the pipes is checked (conductiv-
ity sensor check): the water flow must be
normal.
-Cold water is dispensed from the nozzles
and the air solenoid valve is activated: the
water flow must be irregular.
pump
The selected pump is activated for a few
seconds.
During the test, hot water is dis-
dispensing area.
To Next Page
