05-2019 0073 00 67
firEwall
It allows the appliance’s protection to be in-
creased to prevent unwanted access when
connected to the network.
We recommend enabling the rewall.
The appliance’s rewall cannot be cong-
ured.
softwarE upDatE
Function not available
The software update must be performed
by following the procedure described in the
“maintenance” chapter.
iNformatioN
Allows all of the information regarding the
appliance’s software can be viewed (ver-
sion, graphic theme used, machine cong-
uration, etc.).
CONNECTIVITY
Email sEttiNgs
The appliance is able to send notications
(via email) regarding events and faults.
connection and a SMTP outgoing mail
server with an active email account.
An outgoing mail server (SMTP: Simple
Mail Transfer Protocol) is a server that
sends emails.
-
tions. It is impossible to receive emails
on the appliance.
Enable the function so that you can set the
parameters for sending emails, in addition
to the email addresses of notication recip-
ients.
The parameters vary depending on the
SMTP server used (internet email service
provider or an email server on an internal or
proprietary LAN network).
The appliance provides a set of precong-
ured parameters for the major email service
providers on the internet.
It is possible to manually enter the email
parameters for the other internet email ser-
vice providers or for email servers on inter-
nal or proprietary (custom) LAN networks.
For email servers on the internal LAN
appropriate parameters.
For internet email service providers,
you need to contact the email service
provider support or support services in
order to have access to the appropriate
email parameters.
You can enter and delete the email ad-
dresses that you intend to send notica-
tions to.
After setting the parameters, you can send
a test email to check that it has been con-
gured correctly.
To Next Page
