EVOCA La Radiosa - Page 76

68 05-2019 0073 00
sEttiNgs
Enable emails to be sent (ON/OFF) in order
to be able to enter the conguration param-
eters.
Enter:
-The sender of the appliance’s messages,
e.g. Vending Machine.
-The name of the outgoing SMTP (Simple
Mail Transfer Protocol), e.g. smtp.example.
com.
-The port number used by the outgoing
mail server. The common port numbers
are: 25, 465 and 587.
-Enable the “Authentication required” pa-
rameter in order to enter the SMTP pass-
word. Authentication is required in order to
allow an email to be sent.
Enter the SMTP user: the sender email,
e.g. vendingmachine@domain.com and its
relative password.
“Show password” allows you to view the
entered password in plain text.
-Indicate whether the outgoing mail server
uses the secure SMTPS connection.
-Add the email addresses of the recipients
and select which types of emails they
will receive (event alerts, faults, resolved
faults, etc.).
 The appliance provides a set of pre-
congured email parameters for the major
internet email service providers.
If you want to use any email services that
are not precongured and available from
the drop-down menu, choose “custom”.
EvENt alErt NotificatioNs
Enable the events for which you want to
receive notications (e.g. access to menus,
sanitisation operations, etc.).
fault alErt NotificatioNs
Enable the faults you want to receive noti-
cations for (e.g. no coee, no water, etc.).
Eva-Dts NotificatioNs
It allows the user to schedule the sending
of emails with the data in EVA-DTS format.