EVOCA La Radiosa - Machine Identification; Installation Date; Technical Support Contact Information; Energy Saving Mode

05-2019 0073 00 55
macHiNE iDENtificatioN
Allows you to enter a numerical code and
name to identify the appliance.
The code can be used to identify the appli-
ance when analysing the statistics.
iNstallatioN DatE
Allows the date that the appliance was in-
stalled to be set.
Use
to set the date.
 The date is used to manage mainte-

rinse cycle intervals.
tEcHNical support coNtact iNformatioN
Allows the contact information (name and
phone number) of the technical support to
be entered, in the event of faults.
This information will be displayed should a
fault occur.
This information can be displayed for faults
which block the appliance and/or faults
which do not block the appliance, or for
faults which cannot be reset during normal
operation.
Use
to edit the contact information.
ENERGY SAVING MODE
The appliance's energy saving function
can be enabled. Its parameters can also be
modied and its time frames can be set.
sEttiNgs
Enables/disables the energy saving func-
tion.
The appliance can manage various energy
saving proles.
Some of the parameters in every energy
saving prole can be customised.
“soft moDE” profilE
This prole enables the energy saving
mode after the appliance has a period of
inactivity.
When a selection is requested, the ma-
chine exits the energy saving mode.
It is possible to:
-Set after how many minutes of appliance
inactivity to activate the energy saving
profile.
-Set the maintenance temperature of the
heating unit(s) in the energy saving mode.
-Enable/disable the appliance’s lighting.
-Select the display brightness level from
those that have been predefined.