EVOCA La Radiosa - Selection Settings; Display Layout; Display Layout of the Selection Categories; Selection Categories

05-2019 0073 00 39
SELECTION SETTINGS
Display layout
Select the layout of the selections from the
default ones which are displayed in normal
user mode.
To change the order of the selections, drag
the selection icon to the new position.
To make a selection available or unavail-
able when the appliance is in normal user
mode, drag the selection icon from the
available selections and vice versa.
Display layout of tHE sElEctioN
catEgoriEs
With the management by categories, the
selections can be grouped by type.
For each category, a selection layout can
be chosen.
To add or delete a selection in a catego-
ry, simply drag the selection icon from the
available selections and vice versa.
To change the order of the selections, drag
the selection icon to the new position.
sElEctioN catEgoriEs
Allows the selection categories to be creat-
ed, modied or deleted.
The selection categories are displayed
during normal operation and they allow the
selections to be grouped by their beverage
type (e.g. "milk-based beverages”).
The function allows:
-A new category to be created
;
-A category to be duplicated
and modi-
fied
;
-A category to be deleted
;
-The available categories to be enabled/
disabled.
crEatiNg or moDifyiNg a catEgory
The name, description and icon of a cate-
gory can be assigned or modied.
bEvEragEs
From the screen, it is possible to:
-Create new beverages and associate a
recipe
.
The software checks that there is compat-
ibility between the recipe and appliance
configuration (layout).
If  is displayed, this means that an in-
compatibility has been detected.
-Delete a beverage
.
-Duplicate
and customise a beverage.
The  icon indicates that the beverage is
available during normal operation.
crEatiNg or moDifyiNg a bEvEragE
It is possible to:
-Assign/modify the name of beverages dis-
played during normal operation.
-Select which recipe to use when preparing
the beverage.
Several recipes can be associated to the
same selection, according to the cup size
(S, M or L).
In normal operating mode, the size of the
cup will be displayed.
By default, the appliance uses recipes for
single drinks; for double selections (X2),
recipes with adequate doses need to be
created.
-The software checks that there is compat-
ibility between the recipe and appliance
configuration (layout).
If  is displayed, this means that an in-
compatibility has been detected.
-Change the image associated with the
beverage (on the main selection screen
and during the dispensing cycle); tap the
image to choose a new image.