EVOCA La Radiosa - Page 48

40 05-2019 0073 00
-Enable the option to prematurely stop a
selection (“stop dispensing” function).
-Associate a multimedia content playlist to
be displayed whilst dispensing.
-Dispense a test beverage.
-Enable the “Jug” function and define its
settings (the number of dispenses re-
quired to fill the jug, whether the jug is
enabled by default upon selection, etc.).
rEcipEs
It is possible to:
-Create a new recipe
.
The newly created recipe is saved in the
“not available” category.
Then, associate the recipe to the bever-
age.
The software checks that there is compat-
ibility between the recipe and appliance
configuration (layout).
If  is displayed, this means that an in-
compatibility has been detected.
-Delete a recipe
.
-Duplicate
and customise a recipe.
The  icon indicates that the recipe is
available during normal operation.
crEatiNg a NEw rEcipE
The guided procedure allows a new recipe
to be created.
A screen is displayed where:
-A name can be assigned to the new reci-
pe.
-Set a wait time (in seconds) for the “Take
beverage” message to appear when the
beverage has been dispensed.
The wait time allows the tubes to be emp-
tied and drip into the cup.
-Tap  and then “Add preparation” to add
the products which make up the recipe
(e.g. coffee, chocolate, etc.).
The parameter screens vary according to
the added product (espresso coffee, fresh
brew coffee, instant powders, etc.).
-To customise the beverage, tap  and
then “Add customisation”.
The various parameters can be set for
every customisation option.
The “Coffee strength” customisation option
allows the recipe to be customised (even
those associated with S, M and L beverag-
es).
-Save the settings and return to the main
screen.
“Test recipe” on the main screen allows a
test selection to be dispensed in order to
check the created recipe.
After the test selection, the recipe can be
modied.