60 05-2019 0073 00
Includes all the export and import statistic
functions, machine settings, graphics pack-
ages, etc.
Eva-Dts
Allows EVA-DTS data to be exported onto a
USB memory stick and/or onto data trans-
mission devices (RS232, IrDA, telemetry,
etc.).
usb
Saves a EVA-DTS le onto the USB memo-
ry stick.
sErial commuNicatioN protocol
From this function it is possible to decide
which communication protocol to use for
communication with the data acquisition
devices.
DDcmp - EDDcmp
These have the following congurable pa-
rameters:
-Baud rate: is the transmission speed to
be used in communications between the
appliance and data acquisition devices.
-Pass code: a code that must be the same
as the data transfer terminal, in order to be
identified.
The default setting is 0.
-Security code: a code for mutual recogni-
tion between the appliance and the EVA-
DTS terminal.
The default setting is 0.
-End of transmission: if enabled, it can
identify the end of transmission signal
(EOT) which is sent with the last packet
and interrupt the data transmission.
DEx/ucs
These have the following congurable pa-
rameters:
-Baud rate: is the transmission speed to
be used in communications between the
appliance and data acquisition devices.
viDEos
Allows videos to be imported/exported from
the appliance via a USB memory stick.
supportED viDEo formats
-MP4 codes H.264 and 25 frames per sec-
ond.
-AVI codes XVID, MPEG2 and 25 frames
per second.
-MOV codes MPEG4 and 25 frames per
second.
-1200x800 maximum screensaver resolu-
tion.
-640x480 entertainment video resolution.
The use of high-quality content will
appliance and use up memory space.
Playing videos may require the au-
thorisation of the copyright owner or
other rights related to the content itself.
laws that are in force in the country
where the appliance is installed.
To Next Page
