Test Setup - Test Configurator, Timer, and System
150 MAX-800 Series
RFC 2544 - Subtests
Latency Threshold / Round-Trip Latency Threshold sets the
threshold value as the maximum delay in ms or μs for all frame sizes
when applicable. For Dual Test Set, only available with Round-Trip
Latency Measurement Mode (see Latency Configuration on
page 147).
One-Way Latency Threshold, available for Dual Test Set with
One-Way Latency Measurement Mode (only available on MAX-880
model, see Latency Configuration on page 147), sets the maximum
one-way latency value in millisecond, allowed for all frame sizes.
Latency Unit allows selecting either ms or μs as the reference unit for
the Latency Threshold.
To Next Page
Loading...
