Extron electronics DTP CrossPoint 4K Series - Page 103

DTP CrossPoint 4K Series Matrix Switchers • Matrix Software 95
1111111111
22
22222222
33
33333333
66
66666666
44
44444444
Figure 51. Updating Firmware
8. Click Continue (see figure 51,
1
). The Update Firmware dialog box opens, which
displays the current firmware version.
9. Click Open Firmware File ... (
2
). The Open firmware File dialog box opens.
10. Navigate to the folder where you saved the firmware upgrade file. Select the file (
3
).
11. Click Open (
4
). The Update Firmware dialog box returns to the top.
12. Click Update to continue (
5
).
The Firmware Loader utility tests the
connection, installs the update, and then
verifies the firmware.
At the conclusion of the process, the utility reports Upload Complete.
13. Click Close. The Product Configuration Software window returns to the front.
14. Click the in the connection tab to completely disconnect the program from the unit
and then reconnect the program as described in Starting the Program on page 88.