Extron electronics DTP CrossPoint 4K Series - Page 148

DTP CrossPoint 4K Series Matrix Switchers • Matrix Software 140
Organizing listed building blocks
Building blocks can be organized within default folders or within new folders. You can move
individual building blocks or a folder with all of its contents to a new location.
Create a new folder in the Organize Building Blocks dialog box by clicking the New
Folder icon ( ) in the upper right corner. The folder appears within the currently selected
group in the organizational tree.
To move a building block or a folder, click and drag the desired item to the new location.
Folders can be expanded to view the associated building blocks by clicking the
Plus icon ( ) beside the folder name.
Deleting a building block or folder
1111111111
TIP: If you inadvertently delete a needed default
building block, you can restore it (see “Restore
default building blocks”).
From within the
Organize Building Blocks dialog
box, delete a building block or folder by selecting
(clicking) the block or folder from the list and clicking
the Delete icon ( ,
1
.
Restore default building blocks
If one of the default building blocks, those that were
installed with DSP Configurator, has been deleted, it can be restored.
NOTE: User-defined building blocks cannot be restored.
From within the Organize Building Blocks dialog box, restore default building blocks by
selecting (clicking) the Restore Default Building Blocks icon ( ). The default building
blocks and original folders are restored to the list.
Importing or exporting building blocks files
You can import a building blocks file from another computer running DSP Configurator or
export a file for use elsewhere. Building blocks files are saved with an XML file extension.
Import a building blocks file from within the Organize Building Blocks dialog box as
follows:
1. Click the Import Building Blocks File icon ( ). The Import from... dialog box
opens.
2. Browse to and select the desired building blocks file.
3. Click Open. The selected building blocks file is imported into the Organize Building
Blocks dialog box.