Extron electronics DTP CrossPoint 4K Series - Page 155

DTP CrossPoint 4K Series Matrix Switchers • Matrix Software 147
Expansion input channels
The DTP CrossPoint accepts 16 expansion input channels (see figure 81). Expansion inputs
9 through 16 are via Virtual Returns 9 through 16 in the DMP 128.
DMP 128 ProDSP
Digital Matrix Processor
DTP CrossPoint 108
}
Figure 81. Expansion Input Channels
Connection
No special setup is required; just connect the two devices. By default, the DMP 128 is
the primary unit and the DTP CrossPoint is always the secondary unit. If you have trouble
connecting the matrix switcher and the DMP 128, check that the DMP 128 is set to be the
primary device.