DTP CrossPoint 4K Series Matrix Switchers • HTML Pages 157
1111111111
11
11111111
22
22222222
Figure 86. Updating Firmware
6. Navigate to the folder where you saved the firmware upgrade file. Select the file and
click Open (see figure 86,
1
). The Firmware Update dialog box returns to the top.
7. Click Upload (
2
). The switcher reports Uploading, Initializing, Installing, and
Rebooting. this process may take 6 to 8 minutes. After the reboot is complete, the
display returns to the default HTML page (see figure 83 on page 154).
NOTE: If the default HTML page does not display after 10 minutes, close the Web
browser and reopen.
To Next Page
Loading...
