Extron electronics DTP CrossPoint 4K Series - Page 39

DTP CrossPoint 4K Series Matrix Switchers • Operation 31
NOTE: See Front Panel Operations, beginning on page 34, for detailed descriptions
of the following operations.
F
View (
<
) button (see figure 24 on page 25 and figure 25 on page 26) —
The View (
<
) button has one primary function (❏) and five secondary functions (•):
❏ Select and indicate View-only mode, which displays the current configuration.
• With the Esc button, indicates Input Audio Configuration mode.
• With the Enter, Preset, and Esc buttons, selects Serial Port Configuration
mode.
• Selects 38400 baud for the rear panel Remote port in Serial Port Configuration
mode, and indicates the selections.
• With the Preset button and Esc button, selects between front panel locks (Lock
mode 2 and Lock mode 0).
• With the Esc button, selects between front panel locks (Lock mode 2 and Lock
mode 1).
G
Esc (
>
) button (see figure 24 and figure 25) — The Esc (
>
) button has one primary
function (❏) and five secondary functions (•):
❏ Cancels operations or selections in progress, resets the front panel button
indicators, and blinks once to indicate that the escape function has been activated.
• With the View button, indicates Input Audio Configuration mode.
• With the Enter, Preset, and View buttons, selects Serial Port Configuration
mode.
• Selects 115200 baud for the rear panel Remote port in Serial Port Configuration
mode and indicates the selection.
• With the Preset button and View button, selects between front panel locks
(Lock mode 2 and Lock mode 0).
• With the View button, selects between front panel locks (Lock mode 2 and
Lock mode 1).