Extron electronics DTP CrossPoint 4K Series - Page 48

DTP CrossPoint 4K Series Matrix Switchers • Operation 40
4. Select an input: Press and release the Input 5 button.
123 4 567 8 9 10
INPUTS
12345678
OUTPUTS
The output buttons for outputs that are not tied to input 5 are
either unlit or background illuminated.
The output buttons for outputs that are tied to
input 5 light or blink the appropriate color:
Amber for audio and video ties (audio follow)
Green for video ties (audio breakaway)
Red for audio ties (audio breakaway, not
shown in this example)
Press the button. It lights amber.
NOTE: You can also view a set of ties by selecting a tied output. Demonstrate this
as follows:
1. Note the number of a lit output button, and then press and release the output
button for an untied (unlit or background illumination) output.
2. Observe that all of the untied outputs light.
3. Then press the output button that you noted previously.
4. Observe that the selected output button, the tied input button (input 5), and the
output buttons light for all of the outputs that are tied to the input.
5. Deselect video: Press and release the Video button.
I / O
VIDEO AUDIO
12345678
OUTPUTS
Press the button.
The b
utton is unlit or
bac
kground illuminated
when deselected.
The
Audio
b
utton
remains lit red to
indicate that only
audio is selected.
The output buttons for outputs that are not tied to
Input 5 are either unlit or background illuminated.
The output buttons for outputs that are tied to input 5
light red to indicate audio ties (audio breakaway).
6. Toggle audio off and video on: Press and release the Video button and the Audio
button.
I / O
VIDEO AUDIO
12345678
OUTPUTS
Press the button.
The b
utton lights
green
when selected.
Press the button.
The button is unlit
or background
illuminated when
deselected.
The output buttons for outputs that are not tied to
Input 5 are either unlit or background illuminated.
The output buttons for outputs that are tied to Input 5
light green to indicate video ties (audio breakaway).