Extron electronics DTP CrossPoint 4K Series - Page 50

DTP CrossPoint 4K Series Matrix Switchers • Operation 42
Example 5: Recalling a preset
In the following example, a preset is recalled to become the current configuration. The steps
show the front panel indications that result from your action.
1. Clear all selections: Press and release the Esc button.
2. Select Recall Preset mode: Press and release the Preset button.
PRESET
1
2
3
4
10
Press and release the
Preset button.
The b
utton lights.
All input and output buttons
with assigned presets light red.
Preset Assigned
No Preset Assigned
3. Select the preset: Press and release the input or output button for the desired preset.
C O N T R O L
PRESET ENTER
ESCVIEW
1
2
3
4
10
The Enter button blinks to
indicate the need to recall
the preset.
Press the b
utton.
The button blinks to indicate that this
preset number is selected but not recalled.
4. Recall the preset: Press and release the Enter button. The configuration stored in
the selected memory location is now the current configuration and can be viewed in the
View-only mode (see example 4 on page 39).
C O N T R O L
PRESET ENTER
ESCVIEW
1
2
3
4
OUTPUTS
The Enter and Preset
buttons return to unlit or
background illumination.
Press the button.
All input and output buttons retur
n
to unlit or background illumination.