Extron electronics DTP CrossPoint 4K Series - Page 95

DTP CrossPoint 4K Series Matrix Switchers • Matrix Software 87
2. Click the Software or Firmware link as appropriate to the operation you are
performing (see figure 42,
2
on the previous page).
TIP: Many popular software packages have direct links on the Download page that
you can click instead. Figure 42 shows the PCS link.
3. Click Download for the desired software or firmware to download (
3
).
TIP: Jump to the nearest page of downloads by clicking the desired filtering letter.
The Log in dialog box appears (see figure 13).
1111111111
22
22222222
Figure 43. Log in Center Dialog Box
4. Enter the E-Mail address and Password associated with your Extron website account
(see figure 43,
1
).
TIPS:
• Contact the Extron S3 Sales & Technical Support Hotline to obtain website
credentials.
• Click Keep me logged in to eliminate steps 4 and 5 in future downloads.
5. Click Log in to copy the software or firmware to the computer (
2
).
6. If your browser asks you to confirm that you want to continue, click Run or make a
similar confirmation (see figure 14,
1
).
1111111111
Figure 44. Download Warning and Confirmation
NOTE: Figure 44 may appear different or may not appear at all, depending on your
Web browser choice and its security settings.
7. Click Run to confirm that you want to run the installation (see figure 44,
1
).
8. For a firmware download, exit this procedure and return to Updating the Firmware
in this Matrix Software section on page 93 or Update the Firmware in the HTML
Pages section on page 156.