XTP CrossPoint Series • Programming Guide 117
X6$
=
Time and date (for read)
In the format: Day,
•
DD
•
Mmm
•
YYYY
•
HH:mm:SS
where:
Day = day of the week: Mon to Sun
DD = day: 01 to 31
Mmm = month: Jan to Dec
YYYY = year: 2000 to 2099
HH = hour: 00 to 23
mm = minute: 00 to 59
SS = second: 00 to 59
X6%
=
GMT offset -12.0 to +14.0 (hours and minutes removed from
GMT)
X6^
=
Daylight Saving Time 0 = Daylight Savings Time off or ignore
1 = Daylight Savings Time on (North America)
2 = Daylight Savings Time on (Europe)
3 = Daylight Savings Time on (Brazil)
X6&
=
IP address
###.###.###.###
X6*
=
Hardware (MAC) address
##-##-##-##-##-##
X6(
=
Number of open
connections
000 to 200
X7)
=
Password Up to 12 alphanumeric characters
NOTE: The HTML language reserves certain characters for specific functions
(see Special Characters on page 120).
X7!
=
Domain name Standard domain name rules apply (for example:
xxx.com)
NOTE: The @ character is acceptable only as the lead-in to the domain name
(such as @extron.com).
X7#
=
E-mail account 65 to 72 (65 = e-mail recipient 1, 66 = 2, 67 = 3,...
72 = recipient 8)
X7$
=
E-mail address Typical e-mail address format (for example:
nnn@xxx.com)
X7%
=
Notification selections,
part 1
I = inputs
F = fans
P = power supply
X7^
=
Notification selections,
part 2
If X7% = I, then X7^ = 00 (all inputs, or 01 to 16 or
32 (input 1 through 16 or 32)
If X7% = F, then X7^ = 00 (all fans)
If X7% = P, then X7^ = 00 (all power supplies)
X7&
=
Notify when? 0 = no response
1 = fail/missing
2 = fixed or restored
3 = both 1 and 2
4 = suspend
X7*
=
DHCP 0 = off (default)
1 = on
To Next Page
Loading...
