Fagor CNC 8065 - Page 447

Installation manual
CNC 8060
CNC 8065
CONCEPTS.
9.
(REF: 1402)
·447·
Configure an axis as rotary axis.
Machine parameter configuration.
Machine parameters MODUPLIM and MODLOWLIM set the module limits for the axis; there
are no travel limits.
Unidirectional rotary axis.
This type of rotary axis only moves in one direction, the one that has been preset for it. The
CNC displays the position values between the limits of the module.
Machine parameter configuration.
Machine parameters MODUPLIM and MODLOWLIM set the module limits for the axis; there
are no travel limits.
Parameter. Value.
AXISTYPE Rotary.
AXISMODE Module.
UNIDIR No.
SHORTESTWAY No.
LIMIT+
LIMIT-
Not being used. There are no travel limits.
MODUPLIM
MODLOWLIM
Limits of the module. Limits to display the position values.
G90 movements. G91 movements.
The axis moves in the preset direction up to the
programmed position.
The axis only admits movements in the preset
direction. The sign of the position value indicates
the moving direction; the absolute position value
indicates the position increment.
Even if the programmed distance is greater than
the module, the axis never turns more than one
revolution.
If the programmed distance is greater than the
module, the axis turns more than one revolution.
Parameter. Value.
AXISTYPE Rotary.
AXISMODE Module.
UNIDIR Positive / Negative.
SHORTESTWAY No.
LIMIT+
LIMIT-
Not being used. There are no travel limits.
MODUPLIM
MODLOWLIM
Limits of the module. Limits to display the position values.