Fagor CNC 8065 - Page 507

Installation manual
CNC 8060
CNC 8065
CONCEPTS.
9.
(REF: 1402)
·507·
Calculation of the kinematics dimensions.
Second contact.
Calculation of parameter TDATA2.
First contact (made when calculating TDATA5).
Second contact.
1 Remove the dial indicator, without loosening
it and position the rotary C axis at 180º.
2 Touch with the dial indicator at point 2.
3 Jot down the position value (coordinate)
shown at the CNC ΔX).
Solution.
TDATA5 Dimensions to calculate.
ΔX Coordinate shown by the CNC.
1 Keep previous preset.
1 Remove the dial indicator, without loosening
it and position the rotary C axis at 0º.
2 Position B rotary axis at 0º.
3 Touch with the dial indicator at point 2.
4 Jot down the position value (coordinate)
shown at the CNC ΔX).
Solution.
TDATA1 Dimensions to calculate.
TDATA5 Dimensions to calculate.
ΔX Coordinate shown by the CNC.
X
Z
B=0º
C=0º
1
TDATA5
TDATA505ΔX⋅,=
X
Z
B=0º
C=0º
1
TDATA5
X
Z
B=180º
C=0º
3
TDATA2
TDATA5
TDATA205ΔXTDATA5–⋅,=