Fagor CNC 8065 - Page 531

Installation manual
CNC 8060
CNC 8065
CNC VARIABLES.
10.
(REF: 1402)
·531·
Variables in a single-channel system.
Identifying the axes and the spindles in the variables.
In these variables one must indicate which axis or spindle they refer to. The axis may be
referred to by its name or logic number; the spindle may be referred to by its name, logic
number or index in the spindle system.
In these variables one must indicate which axis or spindle they refer to. In variables with the
prefix –A.– and –MPA.–, the axes and the spindles are identified with their name or logic
number. In variables with the prefix –SP.–, the spindles are identified with their name or
spindle index. If no spindle is selected in the variables with -SP.- prefix, the variable refers
to the master spindle.
The logic number of the axes is determined by the order in which they have been defined
in the machine parameter table (AXISNAME). The first axis of the table will be logic axis -
1- and so on.
The logic number of the spindles is determined by the order in which they have been defined
in the machine parameter table (NAXIS + SPDLNAME). The logic numbering of the spindles
continues from the last logic axis; hence, in a 5-axis system, the first spindle of the table will
be logic spindle ·6· and so on.
The index of a spindle in the system is determined by the order in which they have been
defined in the machine parameter table (SPDLNAME). The index of the first spindle of the
table will be ·1· and so on.
Mnemoni. Meaning when the variable is executed by the part-
program, the MDI/MDA mode or the PLC.
V.MPA.variable.Z
V.A.variable.Z
Z axis.
V.MPA.variable.S
V.A.variable.S
V.SP.variable.S
Spindle S.
V.MPA.variable.4
V.A.variable.4
Axis or spindle with logic number ·4·.
V.SP.variable.2 Spindle with index ·2· in the system.
V.SP.variable Master spindle.
Mnemoni. Meaning when the variable is executed by an external
interface.
V.MPA.variable.Z
V.A.variable.Z
Z axis.
V.MPA.variable.S
V.A.variable.S
V.SP.variable.S
Spindle S.
V.MPA.variable.4
V.A.variable.4
Axis with logic number ·4·.
V.SP.variable.2 Spindle with index ·2· in the system.
V.SP.variable Master spindle.
AXISNAME SPDLNAME Logic order. Index of the spindle in the
system.
AXISNAME 1 Logic number 1.
AXISNAME 2 Logic number 2.
AXISNAME 3 Logic number 3.
AXISNAME 4 Logic number 4.
AXISNAME 5 Logic number 5.
SPDLNAME 1 Logic number 6. Index 1.
SPDLNAME 2 Logic number 7. Index 2.