Fagor CNC 8065 - Page 539

Installation manual
CNC 8060
CNC 8065
CNC VARIABLES.
10.
(REF: 1402)
·539·
Variables related to general machine parameters.
Syntax.
·nb· Number of the gantry pair
(V.)MPG.SLAVEAXIS[nb]
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Gantry axis [nb]. Logic number of the slave axis.
If no axis has been defined, the variable will return a ·0· value.
Syntax.
·nb· Number of the gantry pair
(V.)MPG.WARNCOUPE[nb]
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Gantry axis [nb]. Difference between the following errors of both axes for issuing a warning.
This variable shows the maximum difference allowed between the following errors of both
axes for issuing a warning.
Syntax.
·nb· Number of the gantry pair
(V.)MPG.MAXCOUPE[nb]
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Gantry axis [nb]. Maximum difference allowed between the following errors of both axes.
This variable shows the maximum difference allowed between the following errors of both
axes.
Syntax.
·nb· Number of the gantry pair
(V.)MPG.DIFFCOMP[nb]
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Gantry axis [nb]. Compensate for the coordinate (position) difference between the two axes
after G74.
Syntax.
·nb· Number of the gantry pair
V.MPG.MASTERAXIS[2] Second gantry pair.
V.MPG.SLAVEAXIS[2] Second gantry pair.
V.MPG.WARNCOUPE[2] Second gantry pair.
V.MPG.MAXCOUPE[2] Second gantry pair.
V.MPG.DIFFCOMP[2] Second gantry pair.