·540·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
Variables related to general machine parameters.
Values of the variable.
This variable returns one of the following values.
(V.)MPG.MAXDIFF[nb]
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Gantry axis [nb]. Maximum position value (coordinate) difference between both axes to
compensate for.
Syntax.
·nb· Number of the gantry pair
CONFIGURATION OF A MULTI-AXIS GROUP.
(V.)MPG.MULNGROUP
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Number of multi-axis groups in the system.
(V.)MPG.MULNAXIS[nb]
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Number of axes and/or spindles making up the multi-axis group.
Syntax.
·nb· Multi-axis group number.
(V.)MPG.MULAXISNAMExn[nb]
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Name of the axes and/or spindles that make up the multi-axis group.
Syntax.
·nb· Multi-axis group number.
·xn· Name of the axis and/or spindle within the multi-axis group.
Values of the variable.
The values returned by this variable are encoded as follows.
Value. Meaning.
0No.
1Yes.
V.MPG.MAXDIFF[2] Second gantry pair.
V.MPG.MULNGROUP
V.MPG.MULNAXIS[2] Second multi-axis group.
V.MPG.MULAXISNAME4[2] Fourth axis of the second multi-axis group.
X=10 X1=11 X2=12 X3=13 X4=14 ... X9=19
Y=20 Y1=21 Y2=22 Y3=23 Y4=24 ... Y9=29
Z=30 Z1=31 Z2=32 Z3=33 Z4=34 ... Z9=39
U=40 U1=41 U2=42 U3=43 U4=44 ... U9=49
To Next Page
Loading...
