·572·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
Variables related to the machine parameters of the channels.
Syntax.
·ch· Channel number.
(V.)[ch].MPG.MAXDYNOVR
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Channel [ch]. Maximum override for the dynamics in HSC.
Syntax.
·ch· Channel number.
(V.)[ch].MPG.STEPDYNOVR
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Channel [ch]. Override step for the dynamics in HSC.
Syntax.
·ch· Channel number.
MOVEMENT OF THE INDEPENDENT AXES.
(V.)[ch].MPG.IMOVEMACH
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Channel [ch]. Movement of the independent axis referred to machine coordinates.
Syntax.
·ch· Channel number.
Values of the variable.
This variable returns one of the following values.
(V.)[ch].MPG.XFITOIND
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Channel [ch]. The transfer inhibit of the channel affects the independent axes.
This parameter indicates whether the transfer inhibit of the channel (_XFERINH mark)
affects the independent axis or not.
Syntax.
·ch· Channel number.
V.[2].MPG.MINDYNOVR Channel ·2·.
V.[2].MPG.MAXDYNOVR Channel ·2·.
V.[2].MPG.STEPDYNOVR Channel ·2·.
V.[2].MPG.IMOVEMACH Channel ·2·.
Value. Meaning.
0No.
1Yes.
V.[2].MPG.XFITOIND Channel ·2·.
To Next Page
Loading...
